AISI Q235B mild steel coils 5.7 X 1250mm Hot Rolled Annealed For Construction

AISI Q235B Carbon Steel Coil 5.7*1250mm Hot Rolled Annealed For Construction

Q235B Carbon Steel Coil description

Q235B is a commonly used grade of low carbon structural steel, and a Q235B carbon steel coil refers to a coil made from this particular grade. Here is a description of Q235B carbon steel coil:

1. Composition: Q235B carbon steel coil is primarily composed of iron and contains a small amount of carbon (up to 0.22%). Other elements that may be present include manganese, silicon, sulfur, and phosphorus. The specific composition may vary depending on the manufacturing standards and processes.

2. Mechanical properties: Q235B carbon steel coil has a minimum yield strength of 235 MPa and a tensile strength of 370-500 MPa. It exhibits good ductility, toughness, and weldability, making it suitable for various structural applications.

3. Versatile applications: Q235B carbon steel coils are widely used in structural and general-purpose applications. They are commonly utilized in construction, machinery, equipment, automotive, and other industries. These coils can be used to manufacture components such as beams, columns, plates, and other structural elements.

4. Corrosion resistance: Q235B carbon steel coil has moderate corrosion resistance. However, in corrosive environments or when exposed to moisture, additional protective measures such as coatings or galvanizing may be required to enhance its resistance to corrosion.

5. Availability and processing: Q235B carbon steel coils are readily available from steel suppliers in various thicknesses, widths, and lengths. The coils can be further processed, such as cutting, slitting, or forming, to meet specific project requirements. They can also be processed into sheets, plates, or other forms depending on the application.

It's important to note that the specific properties and characteristics of Q235B carbon steel coils may vary depending on the manufacturing standards, processes, and specific grades within the Q235B designation. Therefore, it is advisable to consult the relevant standards or consult with steel suppliers to ensure the desired properties and specifications are met for your specific application.

Q235B is a commonly used carbon steel grade in China, which is equivalent to ASTM A36 in the United States and S235JR in Europe. Q235B carbon steel coil refers to a coil made from Q235B steel.

Q235B carbon steel has a relatively low carbon content, making it versatile and suitable for various applications. It offers good weldability, formability, and machinability, making it widely used in general structural and engineering purposes.

The Q235B carbon steel coil typically has a thickness ranging from a few millimeters to several tens of millimeters, depending on the specific requirements of the application. The coil is produced through processes such as hot rolling or cold rolling, where a slab or sheet of Q235B steel is passed through rollers to reduce its thickness and shape it into a coil form.

Q235B carbon steel coils find applications in construction, manufacturing, automotive, and other industries. Some common uses include structural components in buildings and bridges, machinery parts, automotive frames, and general fabrication.

It's important to note that the specific properties and dimensions of Q235B carbon steel coils can vary depending on the manufacturing process, heat treatment, and other factors. Therefore, it is advisable to consult the manufacturer or refer to the product specifications for detailed information on the specific Q235B carbon steel coil you are considering.

Factory product

Our service is the basis of cooperation, and the recognition of customers determines the stability of our long-term strategic partnership.

Quality Detection

In our company, the prime product can only be packaged, and shipped after passed four inspections.If any link does not meet the customer's requirements, we will be notified customers immediately and replaced with other stocks for processing.

Finished product display

At present, we can provide cutting, slitting, laser cutting sheets, laser cutting tubes and profiles, sawing cutting rods and tubes, bending, welding, stamping, CNC machining, the smallest laser drilling diameter can be 0.15mm in diameter, The largest machinable size is 1020mm diameter, the maximum error of the laser is only 0.05mm, the maximum tolerance of the sawing machine is less than 0.15mm, and the length error is 0.05-0.1mm.Believe that our profession will be able to get your greatest recognition and support.

FAQ

Q:Why do you choose us?
A:Our company has been in the steel business for more than thirty years.We have rich international experience,professional,we can provide our customers with a variety of high quality steel products.

Q:Can we provide OEM/ODM service?

A:Yes.Please feel free to contact us for further details.

Q:What are your terms of payment?
A:One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C

Q:Can we visit your factory?
A:A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.

Q:Can you provide samples?
A:Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.